Installation precautions for high pressure hose couplings
The hose shall not be bent excessively either in movement or at rest, nor shall it be bent at the root, but shall begin to bend at least 1.5 times its diameter;
Date:
2024/10/23
Share:
- (1) The hose shall not be bent excessively either in movement or at rest, nor shall it be bent at the root, but shall begin to bend at least 1.5 times its diameter;
- (2) The hose shall not be pulled too tightly when moving to extreme positions, but shall be relatively slack;
- (3) Try to avoid torsional deformation of the hose;
- (4) The hose as far as possible away from heat-radiating components, if necessary, when the heat insulation board;
- (5) should avoid external damage to the hose, such as the use of long-term friction with the surface of the components, etc.; (6) if the hose weight caused by excessive deformation, there should be support pieces
Related News
206 Zhangyi Road, Zhangting Town, Yuyao City, Zhejiang Province, China
