Installation precautions for high pressure hose couplings
the hose in moving or static, can not be excessive bending, not at the root of the bend
Date:
2024/10/30
Share:
(1) the hose in moving or static, can not be excessive bending, not at the root of the bend, at least 1.5 times its diameter to start bending; (2) the hose to move to the extreme position should not be pulled too tight, should be more relaxed; (3) try to avoid the torsional deformation of the hose; (4) as far as possible away from the hose heat-radiating components, if necessary, the fashion heat insulation board; (5) should avoid external damage to the hose, such as the use of the hose with the component surface long-term friction, etc.; (6) if the hose is caused by excessive deformation of self-weight should be supported by (5) should avoid external damage to the hose, such as the use of long-term friction with the surface of the components, etc.; (6) if the hose weight caused by excessive deformation, there should be a support member
Related News
206 Zhangyi Road, Zhangting Town, Yuyao City, Zhejiang Province, China
